Products from West System

This product is a thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated. It can also be used for filling gaps where maximum strength is required.

This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding.

This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding.

The thickening additive is used to control the viscosity of the epoxy and prevent the epoxy runoff in vertical and overhead joints. The strong filler creates a smooth mixture, ideal for general bonding and filleting.

The thickening additive is used to control the viscosity of the epoxy and prevent the epoxy runoff in vertical and overhead joints. The strong filler creates a smooth mixture, ideal for general bonding and filleting.

A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong, on a strength-to-weight basis, it cures to a dark red/brown colour.

A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong, on a strength-to-weight basis, it cures to a dark red/brown colour.

A pure white, hollow glass bubble based, low density filler. The product is designed for filling and fairing of fibreglass.

The filler is the ideal low-density filler for creating a light, easily worked, fairing compound especially suited for fairing large areas. Microlight is easy to sand and mixes with great ease. The filler cures to a tan colour.

The filler is the ideal low-density filler for creating a light, easily worked fairing compound especially suited for fairing large areas. Microlight is easy to sand and mixes with great ease. The filler cures to a tan colour.

Pigments should be added at a rate of approximately 3-5% by weight and should only be added to the final coat of epoxy because the increased viscosity of the mix will impair the ability of the epoxy to penetrate and seal surfaces.

Marine grade toughened epoxy adhesive ideal for creating structural repairs. The thickened epoxy adhesive cures underwater, and will adhere to aluminium, plastic and wooden boats, kayaks and canoes. This easy-to-use kit contains: 125ml -...