Free Shipping Over £50*
30 Day Returns
Call Us +44 (0) 1548 433334

Deck Hardware & Fittings

Deck Hardware, Fittings, Cleats & Winches

If you need a fitting from a cleat or clutch to a fairlead, winch handle or even a bailer this is the place for you. We are dealers for Harken, Lewmar & Selden as well as classic fittings from Davey & Co. Need to prevent chaffing on deck - try the barton range of wear pads, tidy you cockpit with an organiser and have the best looking fairlead in the marina.

Deck Hardware, Fittings, Cleats & Winches If you need a fitting from a cleat or clutch to a fairlead, winch handle or even a bailer this is the place for you. We are dealers for Harken, Lewmar &... read more »
Close window
Deck Hardware & Fittings

Deck Hardware, Fittings, Cleats & Winches

If you need a fitting from a cleat or clutch to a fairlead, winch handle or even a bailer this is the place for you. We are dealers for Harken, Lewmar & Selden as well as classic fittings from Davey & Co. Need to prevent chaffing on deck - try the barton range of wear pads, tidy you cockpit with an organiser and have the best looking fairlead in the marina.

1 From 7
No results were found for the filter!
6" Low Silhouette Cleat
6" Low Silhouette Cleat
This 6" stainless steel low silhouette cleat is a subtle and convenient addition to your boat. The dimensions are: Length 152mm Height 32mm
£29.95 *
Blue Performance Can Holder With Hooks
Blue Performance Can Holder With Hooks
An essential on your yacht to prevent the cans from rolling around the cockpit or finding their way into the bilges down below. Attach a Velcro flap to the wire/rail and fix upright with two webbing tail straps around the lower rail....
£34.95 *
Blue Performance Hatch Cover 4 50 x 50cm
Blue Performance Hatch Cover 4 50 x 50cm
These hatch covers prevent the deterioration and crazing of hatch acrylic and can provide a blind for the night. FEATURES Water, mould and mildew resistant Stretch border with elastic straps for a neat fit Secure with shock cord and...
£49.95 *
Blue Performance Rope Cover (2 Pcs)
Blue Performance Rope Cover (2 Pcs)
Chafe guard for your mooring lines. FEATURES Water repellent polyester 43cm long and up to 32mm round Easy to Use Thread the mooring rope through the cover 2 Clamp the cover in place with velcro straps at each end
£19.95 *
Blue Performance Winch Handle Bag Large
Blue Performance Winch Handle Bag Large
The large winch handle bag from Blue Performace measures 240mm 120mm x100mm. Easily attached using 3 screws (two of which are hidden behind the winch handle holder and one below.) FEATURES Reinforced water resistant tube Water, mould and...
£34.95 *
Blue Performance Winch Handle Bag Small
Blue Performance Winch Handle Bag Small
Blue Performance Winch Handle Bag 240mm x 90mm x 70mm FEATURES Reinforced water resistant tube Water, mould and mildew resistant Store up to three winches in the large bag Self draining Attach and remove using Blue Performance screw-in...
£29.95 *
Cleat Boot
Cleat Boot
The cleat boot is a simple, yet highly clever product. Sold as a pack containing two pairs (4 boots) they slide over the end of cleats for use out on the water to prevent lines snagging during manoeuvres. The moulding has been designed...
£28.18 *
Cleat SS 4" 4 Hole Base
Cleat SS 4" 4 Hole Base
4" stainless steel hollow base cleat - 102mm (L) x 24mm (H)
£16.50 *
Davey and Co. Belaying Pin Ash 285mm x 25mm
Davey and Co. Belaying Pin Ash 285mm x 25mm
The ash pins are 285mm in length and are used as a traditional method to cleat rope. The parallel part is 25mm in diameter and 160mm in length.
£10.84 *
Davey and Co. Belaying Pin Brass 61/4" x 3/8"
Davey and Co. Belaying Pin Brass 61/4" x 3/8"
The brass pins are 158mm in length and are used for a traditional method to cleat rope.
£24.17 *
Davey and Co. Bollard Cleat Bolt Through Gunmetal
Davey and Co. Bollard Cleat Bolt Through Gunmetal
With a more slender line than the classic bollard cleat, this bolt through bollard is available with cleat length from 4" (100mm) - 6" (70mm).
From £74.16 *
Davey and Co. Bollard Cleat Gunmetal
Davey and Co. Bollard Cleat Gunmetal
A clean and simple screw down gunmetal bollard cleat with length of cleat varying from 2/12" (62mm) to 6" (150mm). Base diameter varies from 2" (50mm) to 3 1/4" (83mm).
From £70.08 *
1 From 7
Viewed