Topseller of West System
Products from West System
No results were found for the filter!
West System 104 Junior Pack 600g The West System 104 Junior Pack is a great starter epoxy pack that wets out glass fabrics. When adding fillers the product works to create adhesives and fairing compounds.
£20.95 *
West System Epoxy 105A Resin 1.0kg 105 Epoxy Resin® is the base material on which all West System 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a...
£22.95 *
West System Epoxy 105B Resin 5.0kg 105 Epoxy Resin® is the base material on which all West System 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a...
£89.95 *
West System Epoxy 205A Hardener 0.2kg 205 Fast Hardener® is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the...
£14.50 *
West System Epoxy 205B Hardener 1.0kg 205 Fast Hardener® is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the...
£36.95 *
West System Epoxy 206A Hardener 0.2kg 206 Slow Hardener® is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part...
£14.50 *
West System 301A Pump Set 5:1 Specially designed for convenient and accurate dispensing of WEST SYSTEM 105 Resin and 205 or 206 Hardeners. The pumps mount directly on the resin and hardener containers and have been calibrated to deliver the correct working ratio of 5...
£14.95 *
West System 301B Pump Set 5:1 Specially designed for convenient and accurate dispensing of WEST SYSTEM 105 Resin and 205 or 206 Hardeners. The pumps mount directly on the resin and hardener containers and have been calibrated to deliver the correct working ratio of 5...
£15.50 *
West System 402S 0.15kg A high density blended filler intended for small and semi-structural repairs, filling voids, or small scale impact damage to glass fibre laminates.
£10.95 *
West System 403A 0.75kg The product should be used especially for bonding wood. The filler features epoxy thickened with microfibres, giving it good gap-filling qualities while retaining excellent resistance to water penetration.
£18.95 *
West System 403S 0.15kg The product should be used especially for bonding wood. The filler features epoxy thickened with microfibres, giving it good gap-filling qualities while retaining excellent resistance to water penetration.
£7.50 *
West System 404S High Density Filler 0.25kg This product is a thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated. It can also be used for filling gaps where maximum strength is required.
£9.50 *
Viewed