Marine Paints & Varnishes — International, Epifanes & More

Deks Olje D1 is a saturating wood oil which feeds the wood to replace lost oils. It drives out any moisture and air present in the wood and fills the pores with oil. This enriches and stabilises the wood to provide long-lasting protection to both interior and exterior timber. It does not form a film on the surface of the wood but protects from within so it will not peel or crack. Deks Olje D1 is a clear oil which gives a clear matt finish enhancing the natural beauty of the wood and is easy to maintain with no sanding or stripping required. Deks Olje D1 has been optimised for dense, oily and difficult to impregnate woods and can be used on horizontal and vertical surfaces. It provides protection against humidity and its effects as well as against damage from UV rays. If applied in marine environments it can be applied both above and below the waterline. It can also be used as a primer for conventional single pack coatings and decorative finishes. For an intense high gloss finish, topcoat Deks Olje D1 with Deks Olje D2. Ideal Uses for Deks Olje D1 saturating wood oil Preserving your parquet flooring Protecting your outdoor garden furniture Treating your boat hull Protecting your timber decking Reviving your door and window frames Information:Coverage: 1-4m² per litre (8-10m² for maintenance) Tools: Brush, Roller, Garden Sprayer (maintenance only) Suitable for: Exterior & Interior use Clean up: White Spirit Drying Time: 24 hours Re-coating Time: Apply ‘wet-on-wet’ Suitable Surfaces: All Hardwoods (including below the waterline)

Deks Olje D2 is a varnish-like, tough, flexible and durable finish that enhances the natural beauty of both interior and exterior wood. It forms a highly flexible film which moves with the wood to prevent peeling and flaking. Deks Olje D2 is easy to apply and to maintain and the more coats you apply the more high gloss the finish will be. No sanding is required between coats and maintenance and repair can also be carried out without stripping! Before using Deks Olje D2, all wood surfaces should be treated and protected with Deks Olje D1 saturating wood oil. Unlike traditional varnishes, Deks Olje D2 will not craze or blister and because of Deks Olje D1’s penetrating qualities it will not peel or flake as water is unable to get in to the wood. On boats, D2 can be used for all applications above the waterline but please note that due to the high gloss finish it is not suitable for surfaces which will be walked on as it would be very slippery. Ideal Uses for Deks Olje D2 High gloss oil Giving an elegant and sophisticated look to wood panelling Finishing accents on your boat like handrails, wheel housings and trims Perfecting window and door frames Varnishing vertical or horizontal surfaces Decorating wooden furniture both inside and out Information:Coverage: 15m2 per litre Tools: Brush, RollerSuitable for: Exterior & Interior use (above the waterline) Clean up: White Spirit Drying Time: 12-24 hours per coat depending on temperature & humidity Re-coating Time: 12 hours (apply all coats within 1 week) Suitable Surfaces: New & weathered softwoods & hardwoods

A high quality thinner for brushing or rolling most one-component primers, paints andvarnishes. The double distillation of this thinner provides maximum purity.

Epifanes clear high gloss yacht varnish with an extra built-in UV filter is a traditional, tried, tested and highly regarded gloss varnish for those looking for a high-quality finish that will last. Suitable for internal use or external above the waterline (if used domestically - this means not submerged). Ideal for a clear, high gloss finish, Epifanes gloss varnish with its microscopic porosity properties ensures good adhesion on oily and vaporous woods. A clear, traditional yacht varnish with extreme high gloss, unique flow characteristics and high build capacity. The UV filter prevents the wood from discolouration. Its flexibility prevents cracking on working wood. This varnish is famous for its high gloss retention, long-lasting properties, even in tropical climates. This is a genuine yacht varnish that can give that superb finish a wooden surface deserves. Apply up to 7 coats for a mirror finish in harsh conditions with sanding in between. Drying time between coats is around 24 hours at 20 degrees. The surface is dust dry in 3 hours and it is recommended to thin the first 3-4 coats with Epifanes thinners in decreasing levels. High Gloss Yacht VarnishEasy application and good coverageExtra UV resistance for finish and colour holding longevity24-hour re-coat time at 20 degreesCoverage single coat 14m2 per litre (this is in testbed conditions and coverage varies significantly depending on wood and conditions)Can be air-sprayed or applied with a brush

Epifanes Rapidclear offers quick and easy wood protection without the hassle of sanding between coats.  It's a one-component clear wood finish based on modified alkyd/urethane resin. Rapidclear can be used for renewing weathered areas prior to applying a varnish system for those requiring a quick and easy semi-gloss finish with maximum durability, U.V. protection and longevity.  Rapidclear provides an enhancing coat that bonds extremely well to teak and other oily woods, preventing discoloration and emphasizing the natural grain of the wood.  It has great water resistance and flexibility.  Only four to five coats need to be applied under most conditions and Rapidclear can be applied evey 5 - 6 hours.  Maintenance is easy.  Simply clean the surface and re-apply when needed.

Epifanes Rubbed Effect Varnish gives a clear satin finish to varnish work. Suited to interior boat, domestic and commercial uses it is a fast drying varnish which is resistant to common household and marine aggressors including alcohol. The satin sheen varnish can be recoated after 12 hours and although we often hear of it being used standalone is best applied as a top coat to a few build up layers of gloss varnish or Epifanes Rapid Clear. Effectively it is a finishing coat to get the satin varnish finish rather than gloss.  This is an easy to apply yacht varnish using a brush or it can be air-sprayed, usefully it is dust dry in one hour (at 20 degrees) It is recommended to use 5 coats and to use thinners leaving 24 hours drying time on the earlier coats before sanding. As a varnish, this is an excellent top-up or refresh satin varnish and can be used over existing (sanded) varnish to give the satin look.  Satin yacht varnish for interior use - can be used for domestic or commercial application Provides a clear satin sheen  Hard wearing varnish resistant to most household chemicals and alcohol Can be applied over existing varnished surfaces Application with brush or spray thinner Topcoat drying times 12 hours, lower coats 24 hours Theoretically, 1 litre covers 12 m2 although this is under test condition and type of wood, preparation and coating makes a significant difference

Thinner for spray applications of one-component primers, paints and varnishes. Also highly suited for degreasing wood and existing paint and varnish layers.

Fertan converts rust to metal and offers protection from the reformation of rust. Available in various easy to use size containers and sprays Fertan can be used on boats, cars, trucks and structural steel such as agricultural buildings. For best results old loose rust should be removed, the surface should then be dampened and the Fertan applied with brush, sponge or spray. All rust areas will then go black in between 1 and 24 hours. It may be necessary to apply a little moisture after 2 hours in dry conditions and a second treatment can be applied (but should not be required). After 24-48 hours the surface can be washed and painted. Used by car restorers, boat builders and DIY enthusiasts.  Fertan Rust Cure An easy to apply rust converting Liquid Apply with brush, sponge or airless spray Ready to paint in 24-48 hours Protects metal after application as well as converting rust Ideal for boat, Land Rover, Classic Car or Steel Shed Available in 250ml (spray), 500ml and 1 litres

International Compass Varnish is a tough high gloss varnish for wooded boats that will last. FEATURES Tough, durable polyurethane finish; Resistant to scratches and surface abrasion, oil, mild acid/alkali and alcohol spills Fast-dry formulation; minimises dust contamination Reduces work time: apply 2 coats per day, sanding only after every 2nd or 3rd coat Contains HALS and UV absorbers thus protecting your wood from sunlight degradation and increasing the lifespan of the coating Superior flow and application characteristics to ensure a smooth, professional finish Light amber colour Suitable for all internal and external woods including oily timbers, such as Teak and Iroko

Cruiser 250 Antifouling from International is an easy to apply and use, cost-effective boat or yacht antifouling. This 3 litre tin is a handy size keeping the cost of antifouling down. Replacing the very popular Cruiser Uno (with a different formula that is more environmentally friendly) the antifouling is self-polishing/eroding and is designed for both power and sailboats. Cruiser 250 is a one season antifouling and it is recommended that 2 coats are applied, it is suitable for wooden, GRP, lead, steel and epoxy composite/carbon fiber surfaces. Please note like many hull antifoulings it is not suited to aluminum substrates. The antifouling can be applied with either brush or roller and practical coverage is 9m2/litre. Cruiser Uno 250 Antifouling 3litre self-polishing/eroding  Can be used on both powerboats and sailing yachts One year's protection 2 coats required Suitable for wood, steel, lead, GRP, cast iron & expoxy composite/carbon fibre Can be applied with brush or roller Coverage 9 meters squared per litre Suitable for use in seawater, freshwater and brackish water Drying time at 5 degrees 1-hour touch dry can be immersed after 8 hours. Should allow 24 hours at 5 degrees before being placed in sling straps Brush cleaner thinner No. 3 Colour options Red, Blue, Navy, Dover White and Black

The 750ml Cruiser 250 Antifouling from International is an easy to apply and use, cost-effective boat or yacht antifouling. Replacing the very popular Cruiser Uno (with a different formula that is more environmentally friendly) the antifouling is self-polishing/eroding and is designed for both power and sailboats. Cruiser 250 is a one season antifouling and it is recommended that 2 coats are applied, it is suitable for wooden, GRP, lead, steel and epoxy composite/carbon fiber surfaces. Please note like many hull antifoulings it is not suited to aluminum substrates. The antifouling can be applied with either brush or roller. and practical coverage is 9m2/litre. Cruiser Uno 250 Antifouling 750ml self-polishing/eroding  Can be used on both powerboats and sailing yachts One year's protection 2 coats required Suitable for wood, steel, lead, GRP, cast iron & expoxy composite/carbon fibre Can be applied with brush or roller Coverage 9 meters squared per litre Suitable for use in seawater, freshwater and brackish water Drying time at 5 degrees 1-hour touch dry can be immersed after 8 hours. Should allow 24 hours at 5 degrees before being placed in sling straps Brush cleaner thinner No. 3

Danboline provides a high opacity, hard-wearing high sheen finish that is easily cleaned and maintained. It can be applied to wood, steel, aluminium or GRP after suitable priming. It is a hard wearing coating for bilges, lockers and bulkheads and has excellent chemical resistance to fumes, fuel and oil that cleans easily for reduced maintenance. Area: Above and below the waterline. Finish: High Sheen Practical Coverage (m²/Lt): 11.0 No. of coats: 1 - 2 Substrates: GRP, Wood*, Steel*, Aluminium* (*over suitable primers) Application: Brush, Roller Thinners: No.1

International Goldspar Satin is a polyurethane varnish with a fine satin finish for use on interior woodwork. Resistant to hot water, mild acids and alkalis. Its fast-dry formulation minimises dust contamination and allows rapid build up of coats. Finish: Satin No. of coats: 3 Practical Coverage (m²/Lt): 10.30 Substrates: Wood (suitable for use direct to oily timber e.g teak or iroko) Application: Brush, Roller Thinners: No. 1 (Brush/Roller) No. 3 (Spray) UV Protection/Gloss Retention: For interior use only

International Interdeck slip resistant polyurethane deck paint contains a fine mineral additive for a hard wearing, non-slip surface. Suitable for application to all substrates (once suitably primed). Its low sheen finish prevents sunlight dazzle. Just apply straight from the can with a brush or roller. Area: Above the waterline. Finish: Low Sheen Practical Coverage (m²/Lt): 9.5 No. of coats: 1 - 2 Substrates: GRP, Wood*, Steel*, Aluminium* (*over suitable primers) Application: Brush, Roller Thinners: No.1

See for yourself the incredible results from Interstrip. Gone are the days of having to manually strip layers of paint off before beginning the task of redecorating. Now Interstrip does all the hard work for you. It is an anti-fouling stripper formulated for removing anti-fouling from all substrates. Apply on aluminium, GRP/FRP, steel or wood Apply with brush

International Micron 350 Antifouling is a high performance up to 2 season antifouling for yachts and motorboats. This handy tin size of 750ml is perfect for small areas or a touch-up. The formula and type of antifouling are totally new and testing has shown it to be exceptional. Technically - Micron 350 is a SPS (self-polishing co-polymer binder antifouling) which is different to a more traditional eroding antifoul. The result is that there is much better control over the release and thus the antifouling is very much improved and water flow is no longer the vital part of the process. Indeed even more positive is that far less of the copper is released as soon as the boat touches the water. Replacing (but majorly reformated) the ever popular Micron Extra this premium antifouling both keeps its consistency of colour and performs better than it's predecessor. It can be applied to epoxy composite, carbon fibre, cast iron GRP, lead, steel or wood with a brush, roller or can be professionaly sprayed. Coverage with a brush or roller is 9m2 per litre and it is recommended to use 2 coats for 1 season or 3 coats to offer up to 2 years of protection. Also available in 750ml tin for touch up or smaller areas.  Please note colour chart is a guide only all colours should be tested prior to application International Micron 350 Antifouling 750ml Up to two seasons of protection New formula and process loose less copper oxide and offer great consistency of performance Apply with brush roller or professional spray Suited to epoxy composite, carbon fibre, cast iron, GRP, FRP, lead, steel and wood (not suited to aluminum) Touch dry in 1 hour ( 5 degrees) Can be immersed after 24 hours

One UP from International is a single-pack primer/undercoat for use above the waterline with all International one-pack finishes and deck paints. Easy to apply by brush and roller, One UP can be used on all substrates and provides an extra smooth finish reducing the amount of sanding and time required. Pack size: 750ml Colour: Blue Grey Thinner*: YTA800 Thinner No.1 Number of coats: 2-4 coats of 100μm (WFT) Practical coverage: By brush/roller 9.0m2/L Application method: Brush and roller Typical shelf life: 2 years Substrate compatibility: Suitable for all substrates *Thinning is not usually required. Depending upon ambient temperature, application conditions and personal preferences, One UP can be thinned up to 10%. If product is thinned, additional coat may be required to achieve film thickness required to protect the substrate.

Traditional, general purpose gloss varnish Good flow, flexibility and gloss retention High clarity finish for light colour woods Interior, exterior and over existing varnish

International Primocon Underwater Primer is a conventional one-part primer for use below the water. It is quick drying, with anticorrosive properties and can be used under all major antifoulings* or as a barrier coat over incompatible or unknown antifoulings. Area: Below the waterline. Finish: Matt No. of coats: 1 - 5 Practical Coverage (m²/Lt): 7.4 Substrates: GRP, Wood, Steel, Aluminium, Lead, & Zinc Application: Brush, Roller Thinner: No. 3 (*Do NOT use with VC®17m systems)

Schooner is a traditional tung-oil based gloss yacht varnish for classic yachts, suitable for all internal and external wood. It contains UV filters to screen the sun's damaging rays for remarkable durability. Easy application Deep, rich gloss Warm golden colour Excellent UV protection For interior and exterior use Schooner has excellent water resistance, silky application and superior self-leveling properties.

International Super Gloss HS is designed to create a low VOC high-gloss yacht finish. The gloss is formulated using high solid resin technology and is perfect for roller application. It requires little effort to achieve an outstanding finish with great durability. Super Gloss HS is easy to apply even at lower temperatures and achieves full opacity in just one or two coats. Lower solvent content means the gloss has reduced odour and emissions. Practical Coverage: 12m²/L Recommended No. Coats: 1-2 Pack Size: 750ml Substrates:  Aluminium, Zinc-Galvanised Steel, GRP / FRP, Steel and Wood    

General purpose thinner and equipment cleaner for one pack paints and varnishes.

International thinner for Toplac Plus and One UP. Add up to 10% to eliminate the need for tipping off with a brush after rolling on.

General purpose thinner that is typically used with anti-fouling paints. The thinner is also used to aid with spray application of one-part varnishes.