Marine Lighting — Navigation Lights, Deck Lights & Cabin Lights

Part of the Aqua Signal Classic range, the combined masthead/foredeck light is made from durable materials to provide impact and shock resistant polycarbonate housing. The light is waterproof and IP45 rated. The side mountings are bent into position to attach to your mast and the light is designed with 2 NM visibilty range. The black colour is both subtle and easy to maintain.Suitable for vessels <12m

With all brass, heavy construction these contemporary designed lights are machined to aesthetic perfection and then heavily chromed. The swivel stalk can bend and rotate to allow the perfect lighting direction. Tempered glass lens, supplied with LED bulb.10-28V 3WBase Size 58mmx30mm Lens  55mm

Stylish interior light of brass construction. 12v DC, in a lacquered brass finish. Comes with a 75mm diameter shade and a 90mm diameter base, and a 15w bulb.

Solid brass ceiling light. Made from marine grade materials, suitable for coastal areas. Polished brass finish with clear glass (open underneath). Edison screw bulb fitting (SES / ES light bulb not included). Lantern Height (mm) 230 Diameter (mm) 260 Chain Length (mm) 500 Weight (kg) 2.08 Manufacturer Foresti & Suardi Light Element Type E27 Edison Screw (E26 US) Wattage Max. 70W Input Voltage 220-240VacIP Rating IP20 

Solid brass ceiling light. Made from marine grade materials, suitable for coastal areas.Edison screw bulb fitting (SES / ES light bulb not included). Please note, all images show the frosted glass finish, this item has clear glassLantern Height (mm) 200 Diameter (mm) 220 Chain Length (mm) 500 Weight (kg) 2.09Manufacturer Foresti & Suardi Light Element Type E27 Edison ScrewWattage Max. 70W Input Voltage 220-240VacIP Rating IP20 Glass Type Clear

The Coast FL19 LED Head Torch (also known as a headlamp) is a super bright, incredibly strong wide angled IPX4 weatherproof torch. The lifetime warranty offered by Coast tells the story with the head torch, it is impact resistant and made for hard work, on a boat, out hiking or working in dark space. With 330 lumens this is a bright torch but the added benefit of being a wide angled beam (up to 3.5 meters when close up and 1.8 meters in the distance). The single and easy to use top button allows you to swap light modes between high and low or red. Red being useful when sailing at night to maintain night vision and avoid waking others on passage.  The FL19 head torch is powered by 3 AAA batteries which give up to 3hours 15 minutes run time and weighs only  65 grams. The strap has small reflective specs in it which help locate the torch and also enables you to be more easily seen should the light be off. Coast FL19 LED head torch Max power 330 lumens low power 45 lumens up to 38 meters beam distance Runtime up to 3h 15m 3 x AAA batteries required Wide angled flood light beam Reflective strap   Headlamp combines our Wide Angle Flood Beam optic with a dual color feature that includes a white and red LED beam. As a result, the top button on the headlamp gives you the ability to quickly cycle through light modes. The Wide Angle Flood beam is a white LED light that illuminates large areas with an ultra-wide circular beam. Similarly, the top button on the headlamp enables the user to switch to red. The red LED light helps you preserve night vision. The headlamp comes with a reflective safety strap and an IPX4 weatherproof rating, making it perfect for any rugged environment you may find yourself. With Coast’s commitment to quality, the FL19 Headlamp is impact resistant, weather resistant and its LED is virtually unbreakable. The FL19 Headlamp is backed by Coast’s lifetime warranty against defects in materials and workmanship. Tested and rated to ANSI/FL1 standards.

Simply holding this light you appreciate the solidity and quality that it represents. The weight, simple design and polished finish all remind you of the era before complicated circuit boards and dimmer switches. This is a solid, stylish statement; well designed for a boat projecting only 1 1'2" from the bulkhead over a berth (less chance of sitting up abruptly and hitting ones head). You do need some space behind in the bulkhead, the light reqires a 1" (25mm) depth. An integral toggle switch is fitted and as a gesture to modern time, and more crucially due to the substantial savings in energy on board, the light is fitted with 2 warm white 60 lumen LED's as standard. Sizes: Dimensions 5 1/2" x 5" (140mm x 125mm) Recess Dimensions 5 1/4" x 4 1/8" x 1" (134mm x 105mm x 25mm) Projection 1 1/2" (38mm).

Simply holding this light you appreciate the solidity and quality that it represents. The weight, simple design and polished finish all remind you of the era before complicated circuit boards and dimmer switches. This is a solid, stylish statement; well designed for a boat projecting only 1 1'2" from the bulkhead over a berth (less chance of sitting up abruptly and hitting ones head). You do need some space behind in the bulkhead, the light reqires a 1" (25mm) depth. As a gesture to modern time, and more crucially due to the substantial savings in energy on board, the light is fitted with 2 warm white 60 lumen LED's as standard. Dimensions 5 1/2" x 5" (140mm x 125mm) Recess Dimensions 5 1/4" x 4 1/8" x 1" (134mm x 105mm x 25mm) Projection 1 1/2" (38mm)

This graceful light is cast in brass with a polished finish and supplied with a frosted bell glass and SBC (BA15d) bulb holder. Height with glass 4 1/4” (108mm)Projection 3 1/2” (89mm)

Traditionally known as the 'Jelly Mould', these high quality period deck head lights utilise the same genuine frosted glass, the heavy cast brass housing and are suitable for many kinds of traditional craft. This light comes fitted with a red/white LED. When first switched on it always displays the red light first to preserve your night vision. If white light is required, simply turn off and on again and the white light will come on. No special wiring is required. Overall Diameter 6 3/4" (170mm) Projection 2 1/4" (58mm)

Deck Head Lights - ‘Jelly Mould’ These high quality period lights are now available in a variety of versions that can be mixed throughout the boat for maximum practicality and uniformity. Utilising the same genuine frosted glass, the heavy cast brass housing is supplied with a switch and is optionally available unswitched or in a choice of alternate finishes. Suitable for many kinds of traditional craft. Features: With integral switch Polished brass, chrome or nickel plate available to special order Fitted LED’s 12v - 30v as standard Red/White option for night vision available to order

Solidly cast in bronze and available either with a polished or sand blasted finish, the Davey & Co mast light provides a classical twist to a practical light. Available with either standard wiring, with a cable gland at the top or rear wired for cabin side mounting etc. The DC version accepts either a halogen reflector lamp up to 20w or the Davey 255 lm LED. A 110/220v AC mains version of the rear wired model is available fitted with a GU10 bulb holder. As well as being suitable for larger vessels with mains voltage, these also make a classy wall lamp for your home.  The bulb is changed by a hinged glazed door.

The Davey melon prism deck light casts more light below than other deck lights, and also has the benefit of taking up a comparatively small amount of space on deck. However as it has the greatest depth of all decklights, care should be taken when fitting above walkways or other areas to ensure adequate headroom. Finished with a gunmetal plate on the deck and installed recessed into the deck (marine sealant required). 7 1/2" (190mm) total wide, 5 1/2" (140mm deep).

The stainless steel deep frame Davey melon deck prism is designed for thinner decks than the standard prism which makes it possible for use in more modern boats and aluminum or fiberglass as well as steel or wood. The fixing method involves setting the frame in to the deck and then the glass into the frame. The end result from an exterior visual perspective is similar to the standard version. Marine sealant is required to set the glass into the frame. As with all melon deck prisms you do need to consider that the prism will extend further below decks than other shapes. Overall diameter 8 1/8" (206mm) depth 4 1/2" (115mm).

Davey & Co have produced this stunning range of cast brass navigation lights ideal for classic boats or for those seeking a superior level of finish on their boat. The brass lights have been approved by the Italian RINA for boats up to 12 metres, and are supplied with 12v 18w bulbs. A sister product with a chrome finish is also available. They are 3 1/2" (90mm) high, 2 3/4" (70mm) wide and project 2 3/16" (62mm) from the surface. Also available in a chrome finish.

Davey & Co have produced this stunning range of chrome navigation lights ideal for classic boats or for those seeking a superior level of finish on their boat. The chrome lights have been approved by the Italian RINA for boats up to 12 metres, and are supplied with 12v 18w bulbs. A sister product with brass finish is also available. They are 3 1/2" (90mm) high, 2 3/4" (70mm) wide and they project 2 3/16" (62mm) from the surface. Also available in a brass finish.

Manufactured in copper with a polished unlacquered finish, these oil lights will make a stunning backup navigation light. As modern regulations prevent them from being used as standalone navigation lights, you will still need an electric version. However there is no denying that they are bright and great looking. They are 9 and half inches tall (240mm) and are fitted with a 4" (100mm) dioptric lens. The anchor light is an exception and is 9 and three quarter inches tall (248mm).

Although called a step light this is an ideal light for any interior or sheltered areas on board that require subtle low level lighting. The light itself is recessed into the bulkhead and has ribbed heavy duty glass, and a cast brass polished guard. The light and cover project only 1" from the bulkhead. The light is fitted with an SBC bulb holder and will work with an LED lamp. Size: Width 5 1'2" (140mm) Height 4 3/8" (111mm) Recess 1 1/2" (38mm).

Polished cast brass and fitted with a frosted dome glass and switch, this unique light is fitted with a warm white 60 lumen LED’s as standard.

At home everywhere from the heads or engine room, to the foredeck or a state room, these lights prove that sometimes the simple ideas are the best. Designed to be mounted to a bulkhead, they are available either cast in brass with the inside painted white for better reflection, or in a less weighty the aluminum version which is powder coated in white inside and out. Both have a brass gland fitting for the wire inlet. The brass light has a hinged front door with clear glass secured onto its seal with three evenly spaced wing nuts. The aluminium version has a clear glass front with aluminium guards held in place with four screws. Please note the lights are very slightly different sizes and consult the measurements below to match your existing light if necessary. Brass Sizes: Body Diameter 4 1/2" (114mm) Overall Diameter 6" (150mm) Projection 2 1/2" (64mm). Aluminum Sizes: Body Diameter 4 1/2" Overall Diameter 5 1/2" (140mm) Projection 2 3/4" (70mm).

This weatherproof guarded light is of all brass construction with a 90 degree bracket for fixing to a bulkhead. Overall Length 6 1/2" (165mm) Projection 3 1/2" (85mm) Bulb Holder SBC

Stainless steel switched lights, with clear lens. 12v DC 15w - Lens dia. 95mm - 140mm O/D

A pressure die cast brass white masthead anchor light, in a polished brass finish. RINA approved for boats up to 12m in length. Supplied with 12V 20W BA15D bulb. This light fitting is pressure die cast by Foresti & Suardi in Italy. Foresti & Suardi have been manufacturing pressure die cast brass marine hardware since 1961. Fittings such as this are amongst the core products manufactured since those early days. The tooling may have been updated, and technology has moved on a great deal, but these are the heritage pieces that established the reputation of Foresti & Suardi in the global yacht accessories market. This product is an iconic piece of 'deck jewellery', made famous by the 1960's and 70's timber craft and is commonly used on modern interpretations of such boats. Please note that the picture shows a chrome version, this item has a polished brass finish.Lens Angle 360° Lens Type White Width (mm) 93.00 Height (mm) 110.00 Weight (kg) 0.45Manufacturer Foresti & Suardi Finish Brass

Solid brass bulkhead light. Made from marine grade materials, suitable for coastal areas. Light bulb not included. Diameter (mm) 200 Protrusion (mm) 105 Weight (kg) 1.96Manufacturer Foresti & Suardi Light Element Type E27 Edison ScrewWattage Max. 50W Input Voltage 220-240Vac