Hatches, Portlights & Vents — Davey & Co. & Marine Grade
Davey and Co. Bar Quadrant Brass 7.1/2"
£87.83*
This easy to use hatch opener is available in either brass or chrome and is locked in place by butterfly nut. Sizes: Length 7 1/2" (190mm) Travel 5 /2" (140mm).
Davey and Co. Clam Shell Ventilator Gunmetal
£126.48*
Finished in gunmetal, the shell ventilator is available in two sizes and is ideal for use an engine room vent. There is no denying it is a stunning look vent.
Variants from £83.14*
Davey and Co. Cowl Vent Cast Bronze
£674.97*
Cast in heavy bronze and available either polished or chrome plated. Supplied with a bronze deck plate, the cowl vent can be turned and locked in any direction. If you need to remove the vent a blanking cap and key are supplied. The 3" model is 7" (180mm) in height and the 4" model is 10 1/2" (266mm) high. This is a truly stunning ventilator, due to the casting process there may be a delay in delivery, if this is the case we will alert you immediately. If you would like to confirm stock in advance please email or call us.
Variants from £587.51*
Davey and Co. Fixed Portlight Polished Gunmetal
£534.30*
A solid, well-constructed and well-engineered fixed portlight finished in polished gunmetal. Made in England and CE approved for upper hull areas and cabin sides. They are fitted with toughened glass and are supplied with a polished gunmetal outside finishing plate.
Variants from £385.10*
Davey and Co. Half Cowl Vent Gunmetal
£102.32*
Ideal as an engine room vent, the half cowl vent is available for both port and starboard, and is usually purchased as a pair (you will need to order both). Cast in gunmetal, they provide a nice detail on a classic vessel.
Davey and Co. Portlight External Ring Gunmetal
£60.40*
Cast in gunmetal with a polished finish, these flat rings are supplied as outside finishing rings with our portlights but can also be ordered separately here for use as glazing rings or other applications. Also available chrome plated or in polished stainless steel.
Davey and Co. Skylight/Hatch Stay Tube
£271.98*
Ideal for larger hatches or those requiring a good length of travel, you may for example need the screw a long way from the hatch this brass stay is a simple and strong design.
Variants from £259.05*
Davey and Co. Vent Round Grill Brass
£86.53*
The Davey and Co round grill is a heavy polished brass vent that is pre drilled with four holes (screws not included) and is 6 1/4" (160mm) diameter.
Davey and Co. Ventilator Dome Top Gunmetal 3"
£268.57*
The Davey & Co. Dome Top Ventilator is beautifully made in bronze and highly polished. Inside Diameter 3" (75mm)Flange Diameter 5 1/2" (140mm)Closed Height 3 1/4" (82mm)Fastenings No. 10
Davey and Co. Ventilator Squat Pattern Gunmetal 3"
£125.05*
Davey & Co. Squat Pattern Ventilator in polished bronze.Inside Diameter 2 3/4" (70mm)Flange Diameter 4 1/8" (105mm)Closed Height 1 3/8" (35mm)Fastenings No. 8
Deck Plate/Watertight Inspection Hatch
£14.95*
Moulded Polypropylene Screw In Deck Plates. 'Acetone' proof. When open, the lid is secured by a strap to prevent loss overboard.
4"Overall Diameter - 145mm (5.7")Internal Diameter - 103mm (4")Cut Out Diameter - 114mm (4.5")5"Overall Diameter - 170mm (6.7")Internal Diameter - 128mm (5")Cut Out Diameter - 139mm (5.5")6"Overall Diameter - 205mm (8.1")Internal Diameter - 152mm (6")Cut Out Diameter - 165mm (6.5")8"Overall Diameter - 259mm (10.2")Internal Diameter - 202mm (8")Cut Out Diameter - 216mm (8.5")
Variants from £11.95*
Louvre Vent Brass
£15.36*
Louvre Brass Vent with flush at the back. Polished laquer finish.
Variants from £11.48*
Low Silhouette Roof Vent
£39.95*
Low Silhouette Roof Vent with a transparent top. Height above deck is 32mm, with a 103mm cutout.
Midget Vent Stainless Steel
£2.50*
This Midget or Shell Vent in 304 stainless steel is 41mm x 41mm and is an ideal cover for topsides vents and drains such as from the anchor locker.