Seajet 015 Acrylic Underwater Primer

A high performance product that is works as an underwater primer for antifouling paint. It is suitable for both above and below the waterline areas of the boat. An ideal choice for GRP hulls where up to four coats can be applied. 

SEAJET 015 Underwater Primer based on a special acrylic resin, works as an excellent sealer/barrier coat over unknown, incompatible and Teflon based antifouling. It is quick drying and adheres well to subsequent coats. Characteristics: - Quick drying. - Excellent adhesion to subsequent coats. - It forms a tough yet flexible film.

Over existing clean antifouling: roughen the surface with abrasive paper P100-120 grade (wet sanding). Apply 1 coat of SEAJET 015 UNDERWATER PRIMER to assure good adhesion with subsequent SEAJET Antifouling. Consult SEAJET Antifouling compatibility Chart. Only apply to dry, damp-free surfaces. Bare fibreglass: degrease and abrade with P100-120 grade abrasive paper, followed by THINNER E wiping to remove all contamination from the surface. Apply 1 coat of SEJAET 015 UNDERWATER PRIMER followed by SEAJET Antifouling. Wood and steel: degrease if required and abrade followed by final cleaning to remove all contamination from the surface. Apply 3-4 coats of SEJAET 015 UNDERWATER PRIMER followed by SEAJET Antifouling. Aluminium: as for steel but apply SEAJET 017 Epoxy Bonding Primer as first coat.

Spreading Rate: 7.5 m²/l (theoretical)