Epoxy Resin

The pack contains a selected mix of materials used to complete smaller repairs around the boat.

The West System 104 Junior Pack is a great starter epoxy pack that wets out glass fabrics. When adding fillers the product works to create adhesives and fairing compounds.

Marine grade toughened epoxy adhesive ideal for creating structural repairs. The thickened epoxy adhesive cures underwater, and will adhere to aluminium, plastic and wooden boats, kayaks and canoes. This easy-to-use kit contains: 125ml - G/flex 655 resin 125ml - G/flex 655 hardener (250 ml mixed epoxy) 2 x reusable mixing stick/applicators 4 x alcohol cleaning pads 1 pair of disposable neoprene gloves 10 mixing palettes Complete handling and repair instructions.

105 Epoxy Resin® is the base material on which all West System 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. 105 Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odour, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cp) at 72 F (22C). 105 Resin is designed specifically to wet out and bond with wood fibre, fibreglass, reinforcing fabrics and a variety of metals when mixed at the proper ratio with a West System hardener. An excellent adhesive, 105 mixtures will bridge gaps and fill voids when modified with West System fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without “fisheyeing.” 105 Resin/207 Hardener mixtures cure clear so you can achieve a natural finish when coating with varnish.

105 Epoxy Resin® is the base material on which all West System 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance.  105 Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odour, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cp) at 72 F (22C).  105 Resin is designed specifically to wet out and bond with wood fibre, fibreglass, reinforcing fabrics and a variety of metals when mixed at the proper ratio with a West System hardener. An excellent adhesive, 105 mixtures will bridge gaps and fill voids when modified with West System fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without “fisheyeing.” 105 Resin/207 Hardener mixtures cure clear so you can achieve a natural finish when coating with varnish.

205 Fast Hardener® is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures, and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating. Pot Life at 72F (22C): 9 to 12 minutes Cure to a solid state: 6 to 8 hours Cure to maximum strength: 1 to 4 days Minimum recommended temperature: 40°F (4°C)

205 Fast Hardener® is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating. Pot Life at 72F (22C): 9 to 12 minutes Cure to a solid state: 6 to 8 hours Cure to maximum strength: 1 to 4 days Minimum recommended temperature: 40°F (4°C)

206 Slow Hardener® is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating. Pot life at 72°F (22°C): 20 to 25 minutes Cure to a solid state: 10 to 15 hours Cure to maximum strength: 1 to 4 days Minimum recommended temperature: 60°F (16°C)

206 Slow Hardener® is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating. Pot life at 72°F (22°C): 20 to 25 minutes Cure to a solid state: 10 to 15 hours Cure to maximum strength: 1 to 4 days Minimum recommended temperature: 60°F (16°C)

1kg of 105A resin with 0.2kg of 205A hardener. 105A Epoxy Resin 105 Epoxy Resin® is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. 105 Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odour, making it safer to work with than polyester or vinylester resins. 105 Resin is designed specifically to wet out and bond with wood fibre, fibreglass, reinforcing fabrics and a variety of metals when mixed at the proper ratio with a West System hardener. An excellent adhesive, 105 mixtures will bridge gaps and fill voids when modified with West System fillers and can be sanded and shaped when cured. 205A Fast Hardener 205 Fast Hardener® is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating. Pot Life at 72F (22C): 9 to 12 minutes Cure to a solid state: 6 to 8 hours Cure to maximum strength: 1 to 4 days Minimum recommended temperature: 40°F (4°C)

1kg of 105A resin with 0.2kg of 206A hardener. 105A Epoxy Resin 105 Epoxy Resin® is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. 105 Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odour, making it safer to work with than polyester or vinylester resins. 105 Resin is designed specifically to wet out and bond with wood fibre, fibreglass, reinforcing fabrics and a variety of metals when mixed at the proper ratio with a West System hardener. An excellent adhesive, 105 mixtures will bridge gaps and fill voids when modified with West System fillers and can be sanded and shaped when cured. 206A Slow Hardener 206 Slow Hardener® is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating. Pot life at 72°F (22°C): 20 to 25 minutes Cure to a solid state: 10 to 15 hours Cure to maximum strength: 1 to 4 days Minimum recommended temperature: 60°F (16°C)

This pack contains 5kg West System 105 Epoxy Resin and West System 1kg 205 fast hardener. A good pack for small and medium jobs on your boat, laminating multiple areas or sections, this is the fast cure epoxy pack. For slower curing please also look at the standard pack with 206 hardener. 105 resin mixed with the 205 fast hardener is used in the majority of situations to produce a rapid cure. WEST SYSTEM 105-205 cured resin/hardener mixture yields a high-strength, rigid solid which has excellent cohesive properties and provides an outstanding moisture vapour barrier with excellent bonding & coating properties. WEST SYSTEM 105 Epoxy and  205 Hardener Pot Life at 25°C = 10 to 15 minutes Cure to Solid State at 21°C = 5 to 7 hours Cure to Maximum Strength at 21°C = 5 to 7 days. Minimum Recommended Working Temperature = 5°C Pumps Required = (5:1 ratio) 301:205

This pack contains 5kg West System 105 Epoxy Resin and West System 1kg 206 standard hardener. A good pack for medium jobs on your boat, laminating multiple areas or sections, this is the standard cure epoxy pack. For faster curing please also look at the fast pack with 205 hardener. 105A Epoxy Resin 105 Epoxy Resin® is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. 105 Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odour, making it safer to work with than polyester or vinylester resins. 105 Resin is designed specifically to wet out and bond with wood fibre, fibreglass, reinforcing fabrics and a variety of metals when mixed at the proper ratio with a West System hardener. An excellent adhesive, 105 mixtures will bridge gaps and fill voids when modified with West System fillers and can be sanded and shaped when cured. 206A Slow Hardener 206 Slow Hardener® is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating. Pot life at 72°F (22°C): 20 to 25 minutes Cure to a solid state: 10 to 15 hours Cure to maximum strength: 1 to 4 days Minimum recommended temperature: 60°F (16°C) 5:1 mix 105:206

The repair kit contains everything needed to complete small repairs to fibreglass boats.