Vents
Finished in gunmetal, the shell ventilator is available in two sizes and is ideal for use an engine room vent. There is no denying it is a stunning look vent.
Cast in heavy bronze and available either polished or chrome plated. Supplied with a bronze deck plate, the cowl vent can be turned and locked in any direction. If you need to remove the vent a blanking cap and key are supplied. The 3" model is 7" (180mm) in height and the 4" model is 10 1/2" (266mm) high. This is a truly stunning ventilator, due to the casting process there may be a delay in delivery, if this is the case we will alert you immediately. If you would like to confirm stock in advance please email or call us.
Ideal as an engine room vent, the half cowl vent is available for both port and starboard, and is usually purchased as a pair (you will need to order both). Cast in gunmetal, they provide a nice detail on a classic vessel.
The Davey and Co round grill is a heavy polished brass vent that is pre drilled with four holes (screws not included) and is 6 1/4" (160mm) diameter.
The Davey & Co. Dome Top Ventilator is beautifully made in bronze and highly polished. Inside Diameter 3" (75mm)Flange Diameter 5 1/2" (140mm)Closed Height 3 1/4" (82mm)Fastenings No. 10
Davey & Co. Squat Pattern Ventilator in polished bronze.Inside Diameter 2 3/4" (70mm)Flange Diameter 4 1/8" (105mm)Closed Height 1 3/8" (35mm)Fastenings No. 8
Louvre Brass Vent with flush at the back. Polished laquer finish.
Low Silhouette Roof Vent with a transparent top. Height above deck is 32mm, with a 103mm cutout.
This Midget or Shell Vent in 304 stainless steel is 41mm x 41mm and is an ideal cover for topsides vents and drains such as from the anchor locker.