Part of the Aqua Signal Classic range, the combined masthead/foredeck light is made from durable materials to provide impact and shock resistant polycarbonate housing. The light is waterproof and IP45 rated. The side mountings are bent into position to attach to your mast and the light is designed with 2 NM visibilty range. The black colour is both subtle and easy to maintain.Suitable for vessels <12m
Solidly cast in bronze and available either with a polished or sand blasted finish, the Davey & Co mast light provides a classical twist to a practical light. Available with either standard wiring, with a cable gland at the top or rear wired for cabin side mounting etc. The DC version accepts either a halogen reflector lamp up to 20w or the Davey 255 lm LED.
A 110/220v AC mains version of the rear wired model is available fitted with a GU10 bulb holder. As well as being suitable for larger vessels with mains voltage, these also make a classy wall lamp for your home.
The bulb is changed by a hinged glazed door.
The Davey melon prism deck light casts more light below than other deck lights, and also has the benefit of taking up a comparatively small amount of space on deck. However as it has the greatest depth of all decklights, care should be taken when fitting above walkways or other areas to ensure adequate headroom. Finished with a gunmetal plate on the deck and installed recessed into the deck (marine sealant required). 7 1/2" (190mm) total wide, 5 1/2" (140mm deep).
The stainless steel deep frame Davey melon deck prism is designed for thinner decks than the standard prism which makes it possible for use in more modern boats and aluminum or fiberglass as well as steel or wood. The fixing method involves setting the frame in to the deck and then the glass into the frame. The end result from an exterior visual perspective is similar to the standard version. Marine sealant is required to set the glass into the frame. As with all melon deck prisms you do need to consider that the prism will extend further below decks than other shapes. Overall diameter 8 1/8" (206mm) depth 4 1/2" (115mm).
Although called a step light this is an ideal light for any interior or sheltered areas on board that require subtle low level lighting. The light itself is recessed into the bulkhead and has ribbed heavy duty glass, and a cast brass polished guard. The light and cover project only 1" from the bulkhead. The light is fitted with an SBC bulb holder and will work with an LED lamp. Size: Width 5 1'2" (140mm) Height 4 3/8" (111mm) Recess 1 1/2" (38mm).
At home everywhere from the heads or engine room, to the foredeck or a state room, these lights prove that sometimes the simple ideas are the best. Designed to be mounted to a bulkhead, they are available either cast in brass with the inside painted white for better reflection, or in a less weighty the aluminum version which is powder coated in white inside and out. Both have a brass gland fitting for the wire inlet. The brass light has a hinged front door with clear glass secured onto its seal with three evenly spaced wing nuts. The aluminium version has a clear glass front with aluminium guards held in place with four screws. Please note the lights are very slightly different sizes and consult the measurements below to match your existing light if necessary. Brass Sizes: Body Diameter 4 1/2" (114mm) Overall Diameter 6" (150mm) Projection 2 1/2" (64mm). Aluminum Sizes: Body Diameter 4 1/2" Overall Diameter 5 1/2" (140mm) Projection 2 3/4" (70mm).
Solid brass wall light with a high quality chrome finish. Made from marine-grade materials, suitable for coastal areas.Edison screw bulb fitting (SES / ES light bulb not included).Input Voltage 220-240Vac
Height (mm) 260 Diameter (mm) 207 Base Diameter (mm) 91 Protrusion (mm) 300 Weight (kg) 2.02Manufacturer Foresti & Suardi Light Element Type E27 Edison ScrewWattage Max. 50W IP Rating IP43