Resin, Glue, Filler & Sealant
16
%
West System 301B Pump Set 5:1
£17.95*
£21.25*
Specially designed for convenient and accurate dispensing of WEST SYSTEM 105 Resin and 205 or 206 Hardeners. Fits B-Pack size. The pumps mount directly on the resin and hardener containers and have been calibrated to deliver the correct working ratio of 5 parts by volume of resin to 1 part by volume of hardener with one stroke from each pump.
West System 402 Milled Glass Fibre Blend 150g
£17.95*
A high density blended filler intended for small and semi-structural repairs, filling voids, or small scale impact damage to glass fibre laminates.
For GRP boat repair add 25% by weight of 402 to West System epoxy mix. Colour: White150g pack.
3
%
West System 403 Microfibre Adhesive Filler 150g
£11.95*
£12.32*
A blend of cellulose cotton fibres, used as a thickening additive for bonding applications. Epoxy thickened with microfibres provides good wetting out of the substrates and excellent gap-filling properties. Add 4% to 16% by weight to West System epoxy mix. Colour: Off-White.
9
%
West System 403 Microfibre Adhesive Filler 800g
£27.95*
£30.74*
A blend of cellulose cotton fibres, used as a thickening additive for bonding applications. Epoxy thickened with microfibres provides good wetting out of the substrates and excellent gap-filling properties. Add 4% to 16% by weight to West System epoxy mix. Colour: Off-White.
7
%
West System 404 High Density Filler 1.75kg
£49.95*
£53.48*
This product is a thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated.It can also be used for filleting and gap-filling applications. Add 35% to 60% by weight, depending on the viscosity required. Colour: Off-White.
6
%
West System 404 High Density Filler 250g
£12.95*
£13.80*
This product is a thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated.
It can also be used for filleting and gap-filling applications. Add 35% to 60% by weight, depending on the viscosity required. Colour: Off-White.
4
%
West System 405 Filleting Blend Filler 150g
£11.95*
£12.50*
This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding.Consists of a mix of cellulose fibres and other fillers for use in filleting applications when a naturally finished interior is intended. Alcohol or water based stains may be added to adjust the colour. Add 15% to 25% of Filleting Blend by weight. Colour: Tan
10
%
West System 405 Filleting Blend Filler 700g
£29.95*
£33.20*
This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding.Consists of a mix of cellulose fibres and other fillers for use in filleting applications when a naturally finished interior is intended. Alcohol or water based stains may be added to adjust the colour. Add 15% to 25% of Filleting Blend by weight. Colour: Tan
7
%
West System 406 Colloidal Silica Filler 275g
£21.50*
£23.08*
General purpose thickening additive is used to control the viscosity of the epoxy and prevent the epoxy runoff in vertical and overhead joints. The strong filler creates a smooth mixture, ideal for general bonding, gap filling and filleting.Add 3% to 8% by weight to the resin/hardener mix. Colour: Off-White.
4
%
West System 406 Colloidal Silica Filler 60g
£10.95*
£11.39*
General purpose thickening additive is used to control the viscosity of the epoxy and prevent the epoxy runoff in vertical and overhead joints. The strong filler creates a smooth mixture, ideal for general bonding, gap filling and filleting.Add 3% to 8% by weight to the resin/hardener mix. Colour: Off-White.
3
%
West System 407 Low Density Filler 150g
£19.95*
£20.50*
A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong, on a strength-to-weight basis. Add 20% to 40% by weight to mixed epoxy. Colour: Reddish-Brown
14
%
West System 407 Low Density Filler 700g
£59.95*
£69.44*
A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong, on a strength-to-weight basis. Add 20% to 40% by weight to mixed epoxy. Colour: Reddish-Brown
4
%
West System 409 Microsphere Blend Filler 100g
£11.95*
£12.44*
A pure white, blended microsphere based filler for filling and fairing GRP boats. This light weight additive has good load bearing strength but is easy to work with hand tools after cure. For filling and fairing add 10% to 25% by weight to mixed epoxy. Colour: White
5
%
West System 410 Microlight Filler 200g
£39.95*
£41.96*
This low density filler is ideal for creating a lightweight, easily worked fairing compound, especially suited for large areas. Microlight holds a fantastic feather edge and is the easiest filler throughout the West System range to fair.Add between 7% to 16% by weight to mixed epoxy.Colour: Tan
3
%
West System 410 Microlight Filler 50g
£14.50*
£14.94*
This low density filler is ideal for creating a lightweight, easily worked fairing compound, especially suited for large areas. Microlight holds a fantastic feather edge and is the easiest filler throughout the West System range to fair.Add between 7% to 16% by weight to mixed epoxy.Colour: Tan
15
%
West System 655-K G/flex Repair Kit 236ml
£39.95*
£47.10*
Marine grade toughened epoxy adhesive ideal for creating structural repairs. The thickened epoxy adhesive cures underwater, and will adhere to aluminium, plastic and wooden boats, kayaks and canoes. This easy-to-use kit contains:
125ml - G/flex 655 resin
125ml - G/flex 655 hardener (250 ml mixed epoxy)
2 x reusable mixing stick/applicators
4 x alcohol cleaning pads
1 pair of disposable neoprene gloves
10 mixing palettes
Complete handling and repair instructions.
4
%
West System 729A Glass Tape 25mmx10m
£10.95*
£11.39*
The West 729A is a versatile glass tape ideal for reinforcing chines, hull-deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and also provides added abrasion resistance.
West System 730A Glass Tape 50mmx10m
£13.95*
The West 730A is a versatile glass tape ideal for reinforcing chines, hull-deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and also provides added abrasion resistance.
1
%
West System 731A Glass Tape 75mmx10m
£15.50*
£15.67*
The West 731A is a versatile glass tape ideal for reinforcing chines, hull-deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and also provides added abrasion resistance.
5
%
West System 732A Glass Tape 100mmx10m
£18.95*
£19.88*
The West 732A is a versatile glass tape ideal for reinforcing chines, hull-deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and also provides added abrasion resistance.
1
%
West System 733A Glass Tape 150mmx10m
£24.95*
£25.31*
The West 733A is a versatile glass tape ideal for reinforcing chines, hull-deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, it provides additional tensile strength to resist hairline crack development and also provides added abrasion resistance.
West System 741B Plain Weave 200g, 1m x 1m
£14.95*
Glass fabric is ideal for building composite laminates and for the repair of fibreglass structures. It can also be used to provide an abrasion-resistant covering for wood structures.When thoroughly wetted with West System epoxy, the lighter fabrics become transparent, allowing clear, predictable & repeatable properties.For use in general sheathing work on hulls and decks.
5
%
West System 804B-5 Mixing Stirrer x 5
£7.95*
£8.34*
A practical mixing, stirring, application and cleaning tool. Squared, bevelled end reaches mixing pot corners for thorough mixing and blending in fillers and for cleaning up excess epoxy. Also makes a superb paint stirrer.Pack of 5 mixing sticks.
10
%
West System 805 Graduated Mixing Pot 800ml
£1.95*
£2.16*
Strong reusable 800ml mixing pot. When cured, solid epoxy easily pops out of pot allowing it to be reused.