Filler

The creeping crack cure finds and fixes leaks. The product is suitable for leaking windows, portlights, decks and all deck fittings. The multi-functional filler is practical and will save you time and effort. Available in 60ml the sealant is cleverly formulated to be as thin as water so gets drawn in to hairline cracks that arise from stress and use over time. Technically speaking this is a low viscosity coploymer adehsive (you can see why that is not in the name!) Once applied the creeping crack sure will create a watertight seal that is strong yet remains flexiible and is clear. Developed for boats it is now widely used in both automotive and caravan sectors partly for the unique fact that as a sealant it works with nearly every type of material including rubber, wood, hard plastic, glass, concrete, metals, ceramics and even other sealants.  Creeping crack cure is suitable for harline cracks, ideally less than 1mm. Application should be done when the crack is as dry as possible and out of frost or rain. Simply apply the sealant sparingly in 30 min intervals until the crack is filled. The sealant cures in 24 hours and should then be ready for use. 

Suitable for use above and below the waterline, Watertite from International is a super smooth, fast drying filler that fills up to 20mm without sagging. The formula does not shrink and is incredibly water resistant, making it ideal for osmosis damage repairs.

Suitable for use above and below the waterline, Watertite from International is a super smooth, fast drying filler that fills up to 20mm without sagging. The formula does not shrink and is incredibly water resistant, making it ideal for osmosis damage repairs.

Plastic Padding Glass Fibre Filler is a glass fibre reinforced polyester body filler used for bridging and repairing holes. It can be used on steel, aluminium, galvanised surfaces and glass fibre.

Perfect for filling damage to your boat. Marine filler is suitable for aluminium, GRP, steel and wood. This easy to use product works quickly. Simply apply and leave to dry, then smooth down with wet and dry for a finish that you can be proud of.

TEROSON® UP 130 is the original rock-hard, multi-purpose, unsaturated polyester body filler paste with resistance to water, salt water, oil, fuel and most weak acids and chemicals. It can repair gasoline tanks, radiators, concrete, housings and castings and many more. Suitable substrates include steel, aluminium, galvanised surfaces, glass fibre, copper and tin. Number of Components 2 Part Substrates Glass Fibre, Aluminium, Metal: Copper, Metal: Steel, Metal: Tin Technology Polyester Key Characteristics Multipurpose, Oil Resistant, Water Resistant 

TEROSON® UP 620 is a gelcoat unsaturated polyester body filler used for restoring the original surface finish to boat hulls and glass fibre panels. It repairs osmosis blisters and minor surface damage. It can be used on glass fibre and gelcoat finishes. Once set, it is waterproof and may be overpainted if required. Restores the original surface finish to boat hulls and glass fibre panels Repairs osmosis blisters and minor surface damage Waterproof and may be overpainted

TEROSON® UP 610 is the universal unsaturated polyester body filler used for marine applications. It repairs transom/stern damages, stress cracks, keel and rudder surfaces, redundant holes, engine mountings, damaged and pitted propellers, cracks and holes on hulls and superstructures, gaps between hull and deck and worn and damaged superstructures. Universal body filler for marine applications.Suitable for a wide variety of marine repairs above the waterline.

The pack contains a selected mix of materials used to complete smaller repairs around the boat.

A high density blended filler intended for small and semi-structural repairs, filling voids, or small scale impact damage to glass fibre laminates. For GRP boat repair add 25% by weight of 402 to West System epoxy mix. Colour: White150g pack.

A blend of cellulose cotton fibres, used as a thickening additive for bonding applications. Epoxy thickened with microfibres provides good wetting out of the substrates and excellent gap-filling properties. Add 4% to 16% by weight to West System epoxy mix. Colour: Off-White.

A blend of cellulose cotton fibres, used as a thickening additive for bonding applications. Epoxy thickened with microfibres provides good wetting out of the substrates and excellent gap-filling properties. Add 4% to 16% by weight to West System epoxy mix. Colour: Off-White.

This product is a thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated.It can also be used for filleting and gap-filling applications. Add 35% to 60% by weight, depending on the viscosity required. Colour: Off-White.

This product is a thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated. It can also be used for filleting and gap-filling applications. Add 35% to 60% by weight, depending on the viscosity required. Colour: Off-White.

This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding.Consists of a mix of cellulose fibres and other fillers for use in filleting applications when a naturally finished interior is intended. Alcohol or water based stains may be added to adjust the colour. Add 15% to 25% of Filleting Blend by weight. Colour: Tan

This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding.Consists of a mix of cellulose fibres and other fillers for use in filleting applications when a naturally finished interior is intended. Alcohol or water based stains may be added to adjust the colour. Add 15% to 25% of Filleting Blend by weight. Colour: Tan

General purpose thickening additive is used to control the viscosity of the epoxy and prevent the epoxy runoff in vertical and overhead joints. The strong filler creates a smooth mixture, ideal for general bonding, gap filling and filleting.Add 3% to 8% by weight to the resin/hardener mix. Colour: Off-White.

General purpose thickening additive is used to control the viscosity of the epoxy and prevent the epoxy runoff in vertical and overhead joints. The strong filler creates a smooth mixture, ideal for general bonding, gap filling and filleting.Add 3% to 8% by weight to the resin/hardener mix. Colour: Off-White.

A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong, on a strength-to-weight basis. Add 20% to 40% by weight to mixed epoxy. Colour: Reddish-Brown

A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong, on a strength-to-weight basis. Add 20% to 40% by weight to mixed epoxy. Colour: Reddish-Brown

A pure white, blended microsphere based filler for filling and fairing GRP boats. This light weight additive has good load bearing strength but is easy to work with hand tools after cure. For filling and fairing add 10% to 25% by weight to mixed epoxy. Colour: White

This low density filler is ideal for creating a lightweight, easily worked fairing compound, especially suited for large areas. Microlight holds a fantastic feather edge and is the easiest filler throughout the West System range to fair.Add between 7% to 16% by weight to mixed epoxy.Colour: Tan

This low density filler is ideal for creating a lightweight, easily worked fairing compound, especially suited for large areas. Microlight holds a fantastic feather edge and is the easiest filler throughout the West System range to fair.Add between 7% to 16% by weight to mixed epoxy.Colour: Tan