Resin, Glue, Filler & Sealant

The glue is a solvent-based polyurethane adhesive that gives excellent adhesion to both plasticised and unplasticised PVC. Ideal for quick, temporary repairs and will bond with natural rubber, polychloroprene, butyl, nitrile, hypalon and leather. The product also displays excellent resistance to heat, salt water and humidity.

The curing agent is particularly suitable for the manufacture and repair of inflatable boats. The product will bond natural rubber, polychloroprene, butyl, nitrile, hypalon and polyurethane rubber materials and leather in 10-15 minutes. As well as being easy to apply it also displays excellent resistance to heat, salt, water and humidity. Please note that this product is not suited for use on plasticised PVC.

Stick 2 All Purpose Superglue Tube fills gaps up to 0.1mm and bonds non-porous surfaces such as plastics, metals, PVCu, rubber, ceramics and much more. 1 minute instant bond.

Sturdy skeleton gun with hexagonal rod and re-enforced ring and hook end.

Stick 2 Superglue Gel will bond most common materials. The high viscosity formula is ideal for non-drip, vertical, porous or small gap filling applications.

The creeping crack cure finds and fixes leaks. The product is suitable for leaking windows, portlights, decks and all deck fittings. The multi-functional filler is practical and will save you time and effort. Available in 60ml the sealant is cleverly formulated to be as thin as water so gets drawn in to hairline cracks that arise from stress and use over time. Technically speaking this is a low viscosity coploymer adehsive (you can see why that is not in the name!) Once applied the creeping crack sure will create a watertight seal that is strong yet remains flexiible and is clear. Developed for boats it is now widely used in both automotive and caravan sectors partly for the unique fact that as a sealant it works with nearly every type of material including rubber, wood, hard plastic, glass, concrete, metals, ceramics and even other sealants.  Creeping crack cure is suitable for harline cracks, ideally less than 1mm. Application should be done when the crack is as dry as possible and out of frost or rain. Simply apply the sealant sparingly in 30 min intervals until the crack is filled. The sealant cures in 24 hours and should then be ready for use. 

This traditional product is reliable and efficient. Two applications are needed to ensure that all the steam and air is released.

Stick 2 Spray Contact Adhesive is a sprayable glue which bonds to most common materials including wood, GRP, concrete, stone, tiles, rubber, foam, metals, rigid plastics, polyethylene, canvas fabrics, cardboard, paper and cork. Ideal for securing most carpets/floor coverings. Suitable for internal and external use, giving permanent or temporary adhesion.

A highly regarded wood   glue that is D3 waterproof. Gorilla glue is a water PVA glue that bonds wood strongly. Gorilla wood glue dries witha natural colour and can be used inside or outside and has a grip time of 20-30 minutes Strong wood glue Waterproof Indoor and outdoor use Dries with a natural colour PVA waterbased glue Grip time 20-30 mins

Suitable for use above and below the waterline, Watertite from International is a super smooth, fast drying filler that fills up to 20mm without sagging. The formula does not shrink and is incredibly water resistant, making it ideal for osmosis damage repairs.

Suitable for use above and below the waterline, Watertite from International is a super smooth, fast drying filler that fills up to 20mm without sagging. The formula does not shrink and is incredibly water resistant, making it ideal for osmosis damage repairs.

Plastic Padding Glass Fibre Filler is a glass fibre reinforced polyester body filler used for bridging and repairing holes. It can be used on steel, aluminium, galvanised surfaces and glass fibre.

Perfect for filling damage to your boat. Marine filler is suitable for aluminium, GRP, steel and wood. This easy to use product works quickly. Simply apply and leave to dry, then smooth down with wet and dry for a finish that you can be proud of.

A plastic spreader for the application for various adhesives and sealants.

Tef-Gel is designed to stop corrosion between dissimilar metals in the marine environment for example when using stainless steel screws to fasten aluminium fittings. It also prevents seizing and stops galling of stainless steel nuts and bolts. Vital when attaching stainless fittings to aluminium masts and spars, use to bed the fitting to the mast and between the pop rivets or screws and the fitting. Tef-Gel does not electrically insulate hardware. It contains no volatile solvents and will not evaporate, cold flow or dry out, giving protection for many years and enabling easy disassembly if required. This pack is 20ml equivalent to 28g of Tef-Gel.Directions for use:Apply liberally to all surfaces using the brush provided or other suitable tool. Proper application will effectively lubricate and seal assembled parts, prevent seizing, galling and galvanic corrosion. Use white spirit to remove excess Tef-Gel. Wash off skin with soap and water.Manufacturers Description:The function of Tef-Gel in eliminating dissimilar metal corrosion is the elimination of electrolytes from entering the interface of the metallic surfaces. Tef-Gel paste contains 40% PTFE powder and 0% volatile solvents, no silicones or petroleum solvents to evaporate, which would leave voids for electrolytes to be drawn into creating a galvanic cell. When both surfaces are coated and mated with Tef-Gel there are no voids for electrolytes (saltwater) to be drawn in by capillary action over extended periods of time.

Tef-Gel is designed to stop corrosion between dissimilar metals in the marine environment for example when using stainless steel screws to fasten aluminium fittings. It also prevents seizing and stops galling of stainless steel nuts and bolts. Vital when attaching stainless fittings to aluminium masts and spars, use to bed the fitting to the mast and between the pop rivets or screws and the fitting. Tef-Gel does not electrically insulate hardware. It contains no volatile solvents and will not evaporate, cold flow or dry out, giving protection for many years and enabling easy disassembly if required.This pack is 3ml equivalent to 7g of Tef-Gel.Directions for use:Apply liberally to all surfaces using the brush provided or other suitable tool. Proper application will effectively lubricate and seal assembled parts, prevent seizing, galling and galvanic corrosion. Use white spirit to remove excess Tef-Gel. Wash off skin with soap and water.Manufacturers Description:The function of Tef-Gel in eliminating dissimilar metal corrosion is the elimination of electrolytes from entering the interface of the metallic surfaces. Tef-Gel paste contains 40% PTFE powder and 0% volatile solvents, no silicones or petroleum solvents to evaporate, which would leave voids for electrolytes to be drawn into creating a galvanic cell. When both surfaces are coated and mated with Tef-Gel there are no voids for electrolytes (saltwater) to be drawn in by capillary action over extended periods of time.

TEROSON® UP 130 is the original rock-hard, multi-purpose, unsaturated polyester body filler paste with resistance to water, salt water, oil, fuel and most weak acids and chemicals. It can repair gasoline tanks, radiators, concrete, housings and castings and many more. Suitable substrates include steel, aluminium, galvanised surfaces, glass fibre, copper and tin. Number of Components 2 Part Substrates Glass Fibre, Aluminium, Metal: Copper, Metal: Steel, Metal: Tin Technology Polyester Key Characteristics Multipurpose, Oil Resistant, Water Resistant 

TEROSON® UP 620 is a gelcoat unsaturated polyester body filler used for restoring the original surface finish to boat hulls and glass fibre panels. It repairs osmosis blisters and minor surface damage. It can be used on glass fibre and gelcoat finishes. Once set, it is waterproof and may be overpainted if required. Restores the original surface finish to boat hulls and glass fibre panels Repairs osmosis blisters and minor surface damage Waterproof and may be overpainted

TEROSON® UP 610 is the universal unsaturated polyester body filler used for marine applications. It repairs transom/stern damages, stress cracks, keel and rudder surfaces, redundant holes, engine mountings, damaged and pitted propellers, cracks and holes on hulls and superstructures, gaps between hull and deck and worn and damaged superstructures. Universal body filler for marine applications.Suitable for a wide variety of marine repairs above the waterline.

Small wooden mixing sticks for use with mixing of epoxies, paints and other products.Sold singly.

Small wooden mixing sticks for use with mixing of epoxies, paints and other products. Supplied in a pack of 100.

The pack contains a selected mix of materials used to complete smaller repairs around the boat.

The West System 104 Junior Pack is a great starter epoxy pack that wets out glass fabrics. When adding fillers the product works to create adhesives and fairing compounds.

Specially designed for convenient and accurate dispensing of WEST SYSTEM 105 Resin and 205 or 206 Hardeners, fits A-Pack size. The pumps mount directly on the resin and hardener containers and have been calibrated to deliver the correct working ratio of 5 parts by volume of resin to 1 part by volume of hardener with one stroke from each pump.