Varnish & Oil

Deks Olje D1 is a saturating wood oil which feeds the wood to replace lost oils. It drives out any moisture and air present in the wood and fills the pores with oil. This enriches and stabilises the wood to provide long-lasting protection to both interior and exterior timber. It does not form a film on the surface of the wood but protects from within so it will not peel or crack. Deks Olje D1 is a clear oil which gives a clear matt finish enhancing the natural beauty of the wood and is easy to maintain with no sanding or stripping required. Deks Olje D1 has been optimised for dense, oily and difficult to impregnate woods and can be used on horizontal and vertical surfaces. It provides protection against humidity and its effects as well as against damage from UV rays. If applied in marine environments it can be applied both above and below the waterline. It can also be used as a primer for conventional single pack coatings and decorative finishes. For an intense high gloss finish, topcoat Deks Olje D1 with Deks Olje D2. Ideal Uses for Deks Olje D1 saturating wood oil Preserving your parquet flooring Protecting your outdoor garden furniture Treating your boat hull Protecting your timber decking Reviving your door and window frames Information:Coverage: 1-4m² per litre (8-10m² for maintenance) Tools: Brush, Roller, Garden Sprayer (maintenance only) Suitable for: Exterior & Interior use Clean up: White Spirit Drying Time: 24 hours Re-coating Time: Apply ‘wet-on-wet’ Suitable Surfaces: All Hardwoods (including below the waterline)

Deks Olje D2 is a varnish-like, tough, flexible and durable finish that enhances the natural beauty of both interior and exterior wood. It forms a highly flexible film which moves with the wood to prevent peeling and flaking. Deks Olje D2 is easy to apply and to maintain and the more coats you apply the more high gloss the finish will be. No sanding is required between coats and maintenance and repair can also be carried out without stripping! Before using Deks Olje D2, all wood surfaces should be treated and protected with Deks Olje D1 saturating wood oil. Unlike traditional varnishes, Deks Olje D2 will not craze or blister and because of Deks Olje D1’s penetrating qualities it will not peel or flake as water is unable to get in to the wood. On boats, D2 can be used for all applications above the waterline but please note that due to the high gloss finish it is not suitable for surfaces which will be walked on as it would be very slippery. Ideal Uses for Deks Olje D2 High gloss oil Giving an elegant and sophisticated look to wood panelling Finishing accents on your boat like handrails, wheel housings and trims Perfecting window and door frames Varnishing vertical or horizontal surfaces Decorating wooden furniture both inside and out Information:Coverage: 15m2 per litre Tools: Brush, RollerSuitable for: Exterior & Interior use (above the waterline) Clean up: White Spirit Drying Time: 12-24 hours per coat depending on temperature & humidity Re-coating Time: 12 hours (apply all coats within 1 week) Suitable Surfaces: New & weathered softwoods & hardwoods

A high quality thinner for brushing or rolling most one-component primers, paints andvarnishes. The double distillation of this thinner provides maximum purity.

Epifanes clear high gloss yacht varnish with an extra built-in UV filter is a traditional, tried, tested and highly regarded gloss varnish for those looking for a high-quality finish that will last. Suitable for internal use or external above the waterline (if used domestically - this means not submerged). Ideal for a clear, high gloss finish, Epifanes gloss varnish with its microscopic porosity properties ensures good adhesion on oily and vaporous woods. A clear, traditional yacht varnish with extreme high gloss, unique flow characteristics and high build capacity. The UV filter prevents the wood from discolouration. Its flexibility prevents cracking on working wood. This varnish is famous for its high gloss retention, long-lasting properties, even in tropical climates. This is a genuine yacht varnish that can give that superb finish a wooden surface deserves. Apply up to 7 coats for a mirror finish in harsh conditions with sanding in between. Drying time between coats is around 24 hours at 20 degrees. The surface is dust dry in 3 hours and it is recommended to thin the first 3-4 coats with Epifanes thinners in decreasing levels. High Gloss Yacht VarnishEasy application and good coverageExtra UV resistance for finish and colour holding longevity24-hour re-coat time at 20 degreesCoverage single coat 14m2 per litre (this is in testbed conditions and coverage varies significantly depending on wood and conditions)Can be air-sprayed or applied with a brush

Epifanes Rapidclear offers quick and easy wood protection without the hassle of sanding between coats.  It's a one-component clear wood finish based on modified alkyd/urethane resin. Rapidclear can be used for renewing weathered areas prior to applying a varnish system for those requiring a quick and easy semi-gloss finish with maximum durability, U.V. protection and longevity.  Rapidclear provides an enhancing coat that bonds extremely well to teak and other oily woods, preventing discoloration and emphasizing the natural grain of the wood.  It has great water resistance and flexibility.  Only four to five coats need to be applied under most conditions and Rapidclear can be applied evey 5 - 6 hours.  Maintenance is easy.  Simply clean the surface and re-apply when needed.

Epifanes Rubbed Effect Varnish gives a clear satin finish to varnish work. Suited to interior boat, domestic and commercial uses it is a fast drying varnish which is resistant to common household and marine aggressors including alcohol. The satin sheen varnish can be recoated after 12 hours and although we often hear of it being used standalone is best applied as a top coat to a few build up layers of gloss varnish or Epifanes Rapid Clear. Effectively it is a finishing coat to get the satin varnish finish rather than gloss.  This is an easy to apply yacht varnish using a brush or it can be air-sprayed, usefully it is dust dry in one hour (at 20 degrees) It is recommended to use 5 coats and to use thinners leaving 24 hours drying time on the earlier coats before sanding. As a varnish, this is an excellent top-up or refresh satin varnish and can be used over existing (sanded) varnish to give the satin look.  Satin yacht varnish for interior use - can be used for domestic or commercial application Provides a clear satin sheen  Hard wearing varnish resistant to most household chemicals and alcohol Can be applied over existing varnished surfaces Application with brush or spray thinner Topcoat drying times 12 hours, lower coats 24 hours Theoretically, 1 litre covers 12 m2 although this is under test condition and type of wood, preparation and coating makes a significant difference

Thinner for spray applications of one-component primers, paints and varnishes. Also highly suited for degreasing wood and existing paint and varnish layers.

International Compass Varnish is a tough high gloss varnish for wooded boats that will last. FEATURES Tough, durable polyurethane finish; Resistant to scratches and surface abrasion, oil, mild acid/alkali and alcohol spills Fast-dry formulation; minimises dust contamination Reduces work time: apply 2 coats per day, sanding only after every 2nd or 3rd coat Contains HALS and UV absorbers thus protecting your wood from sunlight degradation and increasing the lifespan of the coating Superior flow and application characteristics to ensure a smooth, professional finish Light amber colour Suitable for all internal and external woods including oily timbers, such as Teak and Iroko

International Goldspar Satin is a polyurethane varnish with a fine satin finish for use on interior woodwork. Resistant to hot water, mild acids and alkalis. Its fast-dry formulation minimises dust contamination and allows rapid build up of coats. Finish: Satin No. of coats: 3 Practical Coverage (m²/Lt): 10.30 Substrates: Wood (suitable for use direct to oily timber e.g teak or iroko) Application: Brush, Roller Thinners: No. 1 (Brush/Roller) No. 3 (Spray) UV Protection/Gloss Retention: For interior use only

Traditional, general purpose gloss varnish Good flow, flexibility and gloss retention High clarity finish for light colour woods Interior, exterior and over existing varnish

Schooner is a traditional tung-oil based gloss yacht varnish for classic yachts, suitable for all internal and external wood. It contains UV filters to screen the sun's damaging rays for remarkable durability. Easy application Deep, rich gloss Warm golden colour Excellent UV protection For interior and exterior use Schooner has excellent water resistance, silky application and superior self-leveling properties.

A flexible wood oil/varnish hybrid that acts like a skin for your wood. Microporous properties allow the varnish to breathe with your wood. Careful, accurate and expert-lead design at International has been implemented so that the paint film can expand and contract as well as repelling against water.

This natural oil based yacht varnish is derived from a traditional formula that has been tried, tested and trusted for centuries. The varnish will ensure that your brightwork gleams with all its' beauty. Choose Le Tonkinois Classic over No.1 if you want to build up the finish quicker. For the highest gloss and better performance then choose No. 1. Brilliant penetration, even on oily timbers establishes a permanent bond. No brush marks. The tough non porous weatherproof coating is highly resistant to all the elements including U.V. and sea water.Free of harmful and irritating ingredients, it is perfect for all indoor applications, yet outstrips other competitors for all outside purposes. Ecologically friendly, no petroleum solvents. Will go on top of nearly all existing products except wax, although on bare wood it embellishes all natural features and colour. It is particularly good for boats, garden furniture etc. Remaining flexible, once on it will not crack, chip or peel off. Its natural brilliant gloss can be matted as required.Ingredients, pure resin modified through high temperature curing, Linseed oil, Tung oil, vegetable driers and thinners. Does not contain petroleum based solvents.Coverage, approximately 20 square metres per litre per coat.Drying time, dust dry 2 hours, hard 8 hours, recoat after 24 hours or longer, no maximum time between coats.Application, brush, cloth, roller or spray. Thinners, thinning not necessary for brush application of all coats. Brush cleaner,  White spirit. Number of coats 2 or 3 for indoors, 4 for outdoors, 5 for boats (minimum). Lightly sandpaper the surface between coats. More coats will give longer lasting protection. Finish, bright glossy, add Gelomat to last coat for matt or satin finish. Odour, low, no respiratory irritants. Safe to use anywhere. Fire retard M2 classified. (not easily flammable). Storage life Unopened excellent. Opened several years if stored in container with no air.Special Features:No brush marks, they disappear within 30 minutes of application. Ideal for interior or exterior woodwork. Excellent waterproofing. High resistance to temperature changes and weather conditions, including sea water environment. Good resistance to U.V. abrasion and knocks. Excellent covering power, easy to apply, brush marks flow out. High resistance to acids, alkalis, caustic soda, gasses etc. Withstands boiling water, hot plates and cups.

Gelomat is a liquid matting agent for reducing the high gloss of Le Tonkinois varnish. It is only mixed with the final coat of Le Tonkinois in the following proportions:Mix 1 part Gelomat to 2 parts varnish for a matt finishMix 1 part Gelomat to 3 parts varnish for a satin finishProportions can be varied to suit you preference

Le Tonkinois Marine No.1 natural oil based yacht varnish is derived from the traditional Le Tonkinois Classic formula that has been tried, tested and trusted for centuries. If you want the highest gloss and best all-round performance then choose Le Tonkinois No.1 over Classic. Choose Classic if you want to build up the finish quicker. Brilliant penetration, even on oily timbers establishes a permanent bond. No brush marks. The tough non porous weatherproof coating is highly resistant to all the elements including U.V. and sea water.Free of harmful and irritating ingredients, it is perfect for all indoor applications, yet outstrips other competitors for all outside purposes. Ecologically friendly, no petroleum solvents. Will go on top of nearly all existing products except wax, although on bare wood it embellishes all natural features and colour. It is particularly good for boats, garden furniture etc. Remaining flexible, once on it will not crack, chip or peel off. Its natural brilliant gloss can be matted as required.Ingredients, pure resin modified through high temperature curing, Linseed oil, Tung oil, vegetable driers and thinners. Does not contain petroleum based solvents.Coverage, approximately 20 square metres per litre per coat.Drying time, dust dry 2 hours, hard 8 hours, recoat after 24 hours or longer, no maximum time between coats.Application, brush, cloth, roller or spray. Thinners, thinning not necessary for brush application of all coats. Brush cleaner,  White spirit. Number of coats 2 or 3 for indoors, 4 for outdoors, 5 for boats (minimum). Lightly sandpaper the surface between coats. More coats will give longer lasting protection. Finish, bright glossy, add Gelomat to last coat for matt or satin finish. Odour, low, no respiratory irritants. Safe to use anywhere. Fire retard M2 classified. (not easily flammable). Storage life Unopened excellent. Opened several years if stored in container with no air.Special Features:No brush marks, they disappear within 30 minutes of application. Ideal for interior or exterior woodwork. Excellent waterproofing. High resistance to temperature changes and weather conditions, including sea water environment. Good resistance to U.V. abrasion and knocks. Excellent covering power, easy to apply, brush marks flow out. High resistance to acids, alkalis, caustic soda, gasses etc. Withstands boiling water, hot plates and cups.