Paint Stripper & Rust Treatment

Fertan converts rust to metal and offers protection from the reformation of rust. Available in various easy to use size containers and sprays Fertan can be used on boats, cars, trucks and structural steel such as agricultural buildings. For best results old loose rust should be removed, the surface should then be dampened and the Fertan applied with brush, sponge or spray. All rust areas will then go black in between 1 and 24 hours. It may be necessary to apply a little moisture after 2 hours in dry conditions and a second treatment can be applied (but should not be required). After 24-48 hours the surface can be washed and painted. Used by car restorers, boat builders and DIY enthusiasts.  Fertan Rust Cure An easy to apply rust converting Liquid Apply with brush, sponge or airless spray Ready to paint in 24-48 hours Protects metal after application as well as converting rust Ideal for boat, Land Rover, Classic Car or Steel Shed Available in 250ml (spray), 500ml and 1 litres

See for yourself the incredible results from Interstrip. Gone are the days of having to manually strip layers of paint off before beginning the task of redecorating. Now Interstrip does all the hard work for you. It is an anti-fouling stripper formulated for removing anti-fouling from all substrates. Apply on aluminium, GRP/FRP, steel or wood Apply with brush

Marine Strip (previously known as Dilunett) is a powerful water washable solvent free paint stripper that will remove oil and alkyd based paint, varnish, woodstain and anti-fouling. Designed for marine use and removes up to 8 coats in just one application. It is perfect for use on boat gelcoats as it’s gel consistency means no drips, even on vertical surfaces. It is safe to use on virtually any surfaces including wood, plastic, metal (not aluminium) and GRP and it makes stripping even intricate detailing simple. As it’s water-soluble, Marine Strip can simply be rinsed away with water using a pressure washer and it has an active working time of up to 12 hours meaning it doesn’t require constant supervision and immediate removal as some products do. It is VOC free and non flammable, so Marine Strip is safe to use in poorly ventilated or confined areas. Marine Strip is not effective on 2 component, baked-on paints or polyurethane paint and varnish. Marine Strip is a must-have for all boat owners, a powerful but easy to use paint stripper for almost any surface on your boat. Features: Coverage: 4m2 per litreTools: Brush, Roller Suitable for: Exterior use Clean up: Water Average Working Time: Varies depending on finish to be removed but for alkyd/oil based finishes usually 1 coat – 5-15 mins, 2 coats – 10-30mins, 3 coats – 15-45 mins Active Working Time: 12 hours Suitable Surfaces: Most surfaces (excluding aluminium & wood veneers)

Owatrol Marine Oil is a versatile, highly penetrating air drying oil that can be used alone or added to paint. Used alone it provides a tough, flexible finish, driving out excess moisture and air; displacing it from rusted metal, so stopping rust. Used alone on porous wood surfaces it will saturate and protect the wood from damage caused by moisture and prevent paint from peeling. Added to any oil or alkyd based coatings Marine Oil will give increased wet edge time, improved flow ability, greater adhesion and unlike damaging thinners, will maintain the inherent quality of the paint without affecting its appearance or drying times. Using Marine Oil as a rust inhibitor Marine Oil penetrates through rusted surfaces to the sound metal below, isolating it and protecting it from further rusting. As it is a penetrating oil it can be used directly on the rusted surfaces – it drives out moisture and air and stabilises the metal to protect it from future damage. On brand new metal surfaces, use Owatrol’s AP 60 instead. If you are looking for a high gloss rusted finish you can also overcoat the surface with Deks Olje D2 high gloss clear oil. Using Marine Oil to aid adhesion Marine Oil leaves a bonding film on all surfaces it is used on which maintains the natural look of the surface but allows enhanced adhesion, making it perfect as a foundation for primers or finishing coats. It gives excellent adhesion including on galvanised steel, aluminium, zinc, wood and more. It allows paint to be applied directly to firm rust and is heat resistant up to +175°C. Using Marine Oil as a paint conditioner Marine Oil can be mixed into oil-based paints as a paint conditioner when several great benefits. Firstly, it gives the paint rust inhibiting properties and helps prevent rust on painted surfaces – even when rust is already present. To make paint rust inhibiting, mix 25% Owatrol Oil, 75% paint.It also improves the flow and workability of the paint, maintaining the ‘wet edge’ for longer and reducing brush and roller marks. Finally, it also gives the paint a better viscosity which allows painting work to be carried out in more extreme cold, heat and windy conditions, perfect for the marine environment. Unlike damaging paint thinners it does not alter the inherent qualities or the finish of the paint. To improve paint flow, mix 5-10% Owatrol Marine Oil with paint.Using Marine Oil for wood impregnation When used on dry wood surfaces Marine Oil saturates the wood and protects it from damage caused by moisture. It also helps to prevent paint from peeling and protects metal parts such as hinges and latches from corrosion. Ideal Uses for Marine OilPriming galvanised surfaces with no need for weathering or pickling Preventing further damage in heavily rusted surfaces on hulls and tanks Improving paint flow when working in cold environments Preventing peeling paint on wood surfaces Protecting metal parts on wood surfaces hinges and latches Assuring better adhesion of finishes Information:Coverage: 18m2 per litre Tools: Brush, Roller, Airless or HVLP Sprayer, pump sprayer Suitable for: Exterior & Interior use Clean up: White Spirit Drying Time: Touch Dry: 12 hours, Full Dry: 24 hours depending on temperature and humidity Re-coating Time: 24-48 hours Finish: Transparent Matt