Antifouling

Cruiser 250 Antifouling from International is an easy to apply and use, cost-effective boat or yacht antifouling. This 3 litre tin is a handy size keeping the cost of antifouling down. Replacing the very popular Cruiser Uno (with a different formula that is more environmentally friendly) the antifouling is self-polishing/eroding and is designed for both power and sailboats. Cruiser 250 is a one season antifouling and it is recommended that 2 coats are applied, it is suitable for wooden, GRP, lead, steel and epoxy composite/carbon fiber surfaces. Please note like many hull antifoulings it is not suited to aluminum substrates. The antifouling can be applied with either brush or roller and practical coverage is 9m2/litre. Cruiser Uno 250 Antifouling 3litre self-polishing/eroding  Can be used on both powerboats and sailing yachts One year's protection 2 coats required Suitable for wood, steel, lead, GRP, cast iron & expoxy composite/carbon fibre Can be applied with brush or roller Coverage 9 meters squared per litre Suitable for use in seawater, freshwater and brackish water Drying time at 5 degrees 1-hour touch dry can be immersed after 8 hours. Should allow 24 hours at 5 degrees before being placed in sling straps Brush cleaner thinner No. 3 Colour options Red, Blue, Navy, Dover White and Black

The 750ml Cruiser 250 Antifouling from International is an easy to apply and use, cost-effective boat or yacht antifouling. Replacing the very popular Cruiser Uno (with a different formula that is more environmentally friendly) the antifouling is self-polishing/eroding and is designed for both power and sailboats. Cruiser 250 is a one season antifouling and it is recommended that 2 coats are applied, it is suitable for wooden, GRP, lead, steel and epoxy composite/carbon fiber surfaces. Please note like many hull antifoulings it is not suited to aluminum substrates. The antifouling can be applied with either brush or roller. and practical coverage is 9m2/litre. Cruiser Uno 250 Antifouling 750ml self-polishing/eroding  Can be used on both powerboats and sailing yachts One year's protection 2 coats required Suitable for wood, steel, lead, GRP, cast iron & expoxy composite/carbon fibre Can be applied with brush or roller Coverage 9 meters squared per litre Suitable for use in seawater, freshwater and brackish water Drying time at 5 degrees 1-hour touch dry can be immersed after 8 hours. Should allow 24 hours at 5 degrees before being placed in sling straps Brush cleaner thinner No. 3

International Micron 350 Antifouling is a high performance up to 2 season antifouling for yachts and motorboats. This handy tin size of 750ml is perfect for small areas or a touch-up. The formula and type of antifouling are totally new and testing has shown it to be exceptional. Technically - Micron 350 is a SPS (self-polishing co-polymer binder antifouling) which is different to a more traditional eroding antifoul. The result is that there is much better control over the release and thus the antifouling is very much improved and water flow is no longer the vital part of the process. Indeed even more positive is that far less of the copper is released as soon as the boat touches the water. Replacing (but majorly reformated) the ever popular Micron Extra this premium antifouling both keeps its consistency of colour and performs better than it's predecessor. It can be applied to epoxy composite, carbon fibre, cast iron GRP, lead, steel or wood with a brush, roller or can be professionaly sprayed. Coverage with a brush or roller is 9m2 per litre and it is recommended to use 2 coats for 1 season or 3 coats to offer up to 2 years of protection. Also available in 750ml tin for touch up or smaller areas.  Please note colour chart is a guide only all colours should be tested prior to application International Micron 350 Antifouling 750ml Up to two seasons of protection New formula and process loose less copper oxide and offer great consistency of performance Apply with brush roller or professional spray Suited to epoxy composite, carbon fibre, cast iron, GRP, FRP, lead, steel and wood (not suited to aluminum) Touch dry in 1 hour ( 5 degrees) Can be immersed after 24 hours